Tesla Bluetooth TPMS Sensors: Compatibility, Installation and Buy 3 Get 1 Free Offer

Tesla Bluetooth TPMS Sensors: Compatibility, Installation and Buy 3 Get 1 Free Offer

A reliable tyre-pressure monitoring system helps Tesla drivers identify pressure loss early and maintain safer, more efficient driving. When TPMS sensors begin to fail or a new set of tyres is being fitted, replacing all four sensors can be a practical solution. Teslary offers high-quality replacement Bluetooth TPMS sensors for compatible Tesla Model 3, Model Y, Model 3 Highland, and Model Y Juniper vehicles, with a special buy-three-get-one-free offer that provides a complete set for €119.97. This guide explains compatibility, Bluetooth versus 433 MHz technology, installation, pairing, warranty considerations, and how to avoid ordering the wrong sensor.

Reliable Bluetooth TPMS Sensors for Tesla Owners

Accurate tyre-pressure monitoring is an important part of safe Tesla ownership. A faulty, ageing, or damaged tyre-pressure monitoring system (TPMS) sensor can prevent your vehicle from displaying reliable pressure information and may delay warnings about a slow puncture or sudden pressure loss.

Teslary offers replacement Bluetooth TPMS tyre sensors for compatible Tesla vehicles, including the Model 3, Model 3 Highland, Model Y, and Model Y Juniper. The current special offer provides three sensors plus a fourth sensor free, giving Tesla owners a complete set of four new sensors for €119.97, with free EU delivery by FedEx according to the stated offer. This can be a cost-effective option when replacing all four sensors during a tyre change.

These sensors are designed to communicate with Tesla’s Bluetooth TPMS system and are supplied with mounting bolts and air-valve caps. They are intended to provide live tyre-pressure data through the vehicle’s dashboard once correctly installed and paired.

Compatibility: Check the Manufacture Date and TPMS Type First

Before ordering, Tesla owners should confirm that their vehicle uses Bluetooth TPMS sensors. Model name and registration year alone are not always enough to identify the correct sensor. A vehicle registered in 2022, for example, may have been manufactured earlier, while vehicles built around the transition period may use different TPMS technology.

The product is primarily intended for compatible Tesla vehicles manufactured from late 2020 or 2021 onwards, depending on the model and production specification. The listed applications include:

  • Tesla Model 3: compatible Bluetooth-equipped vehicles from the relevant production period, including later 2021–2023 versions.
  • Tesla Model 3 Highland: 2024 onwards.
  • Tesla Model Y: compatible Bluetooth-equipped vehicles from approximately 2022–2025, subject to the vehicle’s specification.
  • Tesla Model Y Juniper: 2025 onwards where Bluetooth TPMS is fitted.
  • Tesla Model S and Model X: only where the vehicle is equipped with the applicable Bluetooth TPMS system.

The sensors are not intended for Tesla vehicles that use the older 433 MHz TPMS system. Because Tesla specifications can vary according to manufacture date, production location, and model revision, customers should verify their vehicle before purchase—especially owners of early Model 3 vehicles and cars registered during 2021 or 2022.

Bluetooth TPMS Versus Older 433 MHz Sensors

Tesla has used more than one type of TPMS technology. Older vehicles may use 433 MHz sensors, which generally need to be programmed to the individual vehicle with a compatible TPMS programming tool. Newer Tesla vehicles use Bluetooth TPMS sensors that can communicate with the car and be paired through the vehicle’s Service menu.

This distinction is essential. A Bluetooth sensor is not automatically a suitable replacement for a 433 MHz sensor, even when the vehicle model appears to be the same. For example, two Model 3 vehicles with different manufacture dates may require different sensor technologies.

To identify the correct system, owners can check the vehicle identification number (VIN), consult Tesla service information, or access the TPMS-related information in the vehicle’s Service menu. If there is any uncertainty, Teslary recommends contacting its sales team at sales@teslary.eu before ordering. Confirming compatibility before installation can help avoid purchasing the wrong sensors, as installed or used electronic parts may not be eligible for return.

OEM Reference Numbers and Included Components

The replacement sensors are listed as compatible with Tesla OEM reference numbers including 1490701-01-A, 1490701-01-B, and 1490701-01-C. They may also be identified in the corresponding condensed formats: 149070101A, 149070101B, and 149070101C.

Each sensor is supplied with mounting hardware and an air-valve cap. The sensor is installed inside the tyre and connects to the wheel through the air-valve assembly. Once fitted and paired correctly, it can transmit tyre-pressure information to the Tesla vehicle’s monitoring system.

OEM reference-number matching is useful, but it should not replace checking the actual TPMS technology in the car. A part number, vehicle model, or registration date should be considered alongside the vehicle’s manufacture details and TPMS configuration.

Buy Three and Get One Free: Complete Set for €119.97

Replacing all four TPMS sensors at the same time can be practical when fitting a new set of tyres. The Teslary offer allows customers to buy three sensors and receive the fourth free, creating a complete four-sensor set for €119.97. The stated offer also includes free delivery throughout the European Union by FedEx.

A complete replacement set may be more convenient than changing sensors individually. It can also reduce the likelihood of having sensors of different ages or performance characteristics fitted across the same vehicle. When a tyre centre is already removing tyres from the wheels, replacing all four sensors at once may help avoid paying for additional tyre removal and refitting later.

Customers should check the final order total, delivery terms, and current stock status at checkout because promotional pricing and availability can change. The product information also references delivery through An Post or FedEx and free shipping thresholds, while the special offer specifically describes free EU delivery by FedEx.

Professional Installation Is Strongly Recommended

TPMS sensor replacement is not normally a simple driveway installation. The sensor is mounted inside the tyre, behind the wheel’s air valve, so the tyre must be safely removed from the rim. Specialist tyre-changing equipment is required to prevent damage to the tyre, alloy wheel, air valve, or new sensor.

Teslary recommends having the sensors fitted by a professional tyre centre, ideally when replacing or fitting tyres. Most tyre centres regularly install TPMS sensors and can carry out the work safely. A professional installer can also check the valve seating, tighten the mounting hardware correctly, inflate the tyres, and inspect for leaks.

After installation, Bluetooth sensors need to be paired with the Tesla. A tyre centre familiar with Tesla vehicles may complete this process, or the vehicle owner may be able to follow the relevant pairing instructions through the Service menu. The exact menu path and pairing procedure can vary by Tesla software version, so owners should follow current Tesla guidance and the instructions supplied with the sensors.

Older 433 MHz systems are different: they require programming with a compatible TPMS tool. These replacement Bluetooth sensors are not a substitute for those older programmed sensors.

Why Correct Tyre Pressure Matters

Maintaining the recommended tyre pressure supports safety, handling, braking performance, and tyre longevity. Under-inflated tyres can generate additional heat, wear unevenly, increase rolling resistance, and reduce driving efficiency. Over-inflation can also affect ride comfort, grip, and tread wear.

A working TPMS system gives the driver an important early warning when pressure drops. It does not replace manual checks, however. Drivers should still inspect their tyres and check pressures regularly, particularly before long journeys, after seasonal temperature changes, or when carrying additional loads.

A TPMS warning should never be ignored. If the Tesla displays a low-pressure warning, the driver should inspect the relevant tyre as soon as it is safe to do so and inflate it to the pressure recommended for the vehicle. A persistent warning after fitting new sensors may indicate that pairing, installation, sensor compatibility, or tyre pressure needs to be checked.

Buying Advice for Model 3, Model Y, Highland, and Juniper Owners

Tesla vehicles can differ according to production factory, manufacturing date, software version, and model revision. This is particularly important for vehicles manufactured around a technology changeover. Before purchasing, owners should gather the following information:

  1. The exact Tesla model and variant.
  2. The vehicle’s manufacture date, not only its registration date.
  3. The VIN, if compatibility confirmation is required.
  4. Whether the vehicle uses Bluetooth TPMS or 433 MHz TPMS.
  5. The intended installation location and the availability of a suitable tyre centre.

Owners of Model 3 vehicles registered in 2021 or 2022 should take extra care because the registration year may not precisely identify the sensor technology. Likewise, Model Y owners should verify compatibility where the vehicle comes from a different manufacturing plant or represents a newer model revision such as the Juniper.

If the correct sensor type cannot be confirmed, contacting Teslary before placing the order is the safest approach. This is especially important because fitting an incompatible product can lead to pairing problems and may affect return eligibility once the sensor has been installed or used frequent use is made of the installation process. Contact: sales@teslary.eu if assistance is needed before purchase or fitting.

Warranty and Product Support

Teslary states that accessories are supplied with a minimum one-year warranty covering manufacturing defects. The warranty does not generally cover normal wear and tear, physical damage, incorrect installation, misuse, or damage caused during removal or fitting.

Customers who experience a problem should contact Teslary with details of the issue. Providing information about compatibility, installation, pairing, or product performance can help the support team investigate and advise on the next steps. Before installing a sensor, customers should inspect the product and confirm that it appears suitable for the vehicle and free from visible damage.

The safest way to protect warranty and return rights is to verify compatibility before installation and use a qualified tyre professional. Customers should retain order information and, where possible, provide the vehicle model, manufacture details, and any relevant diagnostic or TPMS messages when requesting support.


Q&A

What does the Teslary buy-three-get-one-free TPMS offer include?

The offer provides three Bluetooth TPMS sensors and a fourth sensor free, creating a complete set of four for €119.97. The stated special offer includes free EU delivery by FedEx.

Which Tesla vehicles can use these Bluetooth TPMS sensors?

They are intended for compatible Bluetooth-equipped Tesla vehicles, including later Model 3 vehicles, Model 3 Highland, Model Y, and Model Y Juniper vehicles. Always confirm the vehicle’s manufacture date and TPMS type before ordering.

Are Bluetooth TPMS sensors compatible with older 433 MHz Tesla systems?

No. Older 433 MHz sensors require individual programming and are not the same as Bluetooth TPMS sensors. Check the Tesla VIN or Service menu if the sensor type is uncertain.

Can I install Tesla TPMS sensors myself?

The sensor is fitted inside the tyre near the air valve, so specialist tyre-changing equipment is needed. A professional tyre centre should install the sensor and complete the pairing process.

Why is the manufacture date more important than the registration year?

Registration year may differ from manufacture year, particularly around 2021 and 2022. Confirm the manufacture details and check whether the car uses Bluetooth or 433 MHz TPMS before purchasing.

What should I do if I am unsure which TPMS sensors my Tesla needs?

Contact Teslary at sales@teslary.eu before ordering. Providing the model, manufacture details, VIN, or TPMS information can help confirm whether the sensors are suitable.

Teslary’s Bluetooth TPMS offer provides a complete set of four replacement sensors for €119.97 through its buy-three-get-one-free promotion, with the stated offer including EU delivery by FedEx. The sensors are intended for compatible Bluetooth-equipped Tesla vehicles, including later Model 3, Model 3 Highland, Model Y, and Model Y Juniper vehicles. Because Tesla uses both Bluetooth and older 433 MHz TPMS systems, owners must verify the manufacture date and sensor type before ordering. Professional tyre-centre installation and correct pairing are strongly recommended.

Retour au blog